Loading ...
Loading ...
Loading ...
ratingisbaseduponthe/_merican
Society for Testing and Materials (ASTM)
Carpet Cleaning Effectiveness Testing
(ASTM Test F608). Other performance
factors include Hose Power (ASTM Test
F558), Surface Litter Cleaning, Hard Floor
Cleaning, Edge Cleaning, Air Filtration
and Cleaning Width.
If a minor problem occurs, it usually can be
solved quite easily when the cause is found
by using the checklist below.
Possible Cause
Possible Solution
• Not firmly plugged in
• Plug unit in firmly
• No voltage in wall plug
• Check fuse or breaker
• Blown fuse or tripped breaker
• Replace fuse or reset breaker
• Thermal protector activated
• Allow cleaner to cool for 30 rclinutes
(this will reset the thermal protector)
Possible Cause
Possible Solution
• Broken or worn belt
• Replace belt
• Agitator brush r011worn
• Replace brush roll
• Filter bag full
• Change filter bag
• Incorrect carpet height setting
• Move nozzle control knob to lower
setting
• Blockage in air flow passage
• Clear blockage
Possible Cause
BlOCKage IS Touno:
1. Check fullness of filter bag; change if
needed.
//
Checking airflow path
2. Plug cleaner in and turn ON. Check
for suction at end of hose (A).
a, If there is suction, continue with
step 3.
b. If there is rl0 suction, check for
blockage in hose and dirt tube as
follows:
1) Disconnect hose from dirt duct (C)
by reversing procedure for "Attach
hose" on p. 4, Fig. 1-11 and 1-12.
2) Clear out hose.
3) Look into (C) and remove blockage.
3. Check connection at hose tube (B);
remove any blockage.
D
Checking under bottom plate
4. Turn cleaner OFF and unplug.
5. Remove bottom plate, belt and agitator
(see "The belt" section).
Look into opening (U) for blockages and
defects in material and workmanship for
a period of one full year from date of
purchase. This warranty provides, at no
cost to you, all labor and parts to place
this appliance in correct operating
condition during the warranted period.
This warranty applies when the appli-
ance is purchased in the United States
including its territories and possessions,
or in Canada or from a U. S. Military
Exchange. Appliances purchased
elsewhere are covered by a limited one
year warranty which covers the cost of
parts only. This warranty does not apply
if the appliance is used in a commercial
or rental application.
Warranty service can only be obtained
by presenting the appliance to one of the
following authorized warranty service
outlets. Proof of purchase will be
required before service is rendered.
1. Hoover Factory Service Centers.
2. Hoover Authorized Warranty
Service Dealers (Depots).
For an automated referral of autho-
rized service outlets in the U.S.A.,
phone 1-800-944-9200 OR
visitThe Hoover company on-line at
www.hoover.com
This warranty does not cover pick up,
delivery, or house Galls; however, if you
mail your appliance to a Hoover Factory
Service Center for warranty service,
transportation will be paid one way.
While this warranty gives you specific
legal rights, you may also have other
rights which vary from state to state.
If further assistance is needed, or if there
are questions concerning this warranty or
the availability of warranty service
outlets, write or phone the Consumer
Response Center, The Hoover Company,
101 East Maple St., North Canton, Ohio
44720. Phone 1-330-499-9499.
In Canada, contact Hoover Canada,
Burlington, Ontario LTR 4A8,
1-800-263-6376.