Loading ...
Loading ...
Loading ...
Removing lens
Disconnect cleaner from electrical
outlet.
Using a screwdriver, remove the two
screws as shown and lip off lens.
Installing bulb
Pull old bulb straight out of socket. Push
new bulb straight into socket until locked
in place.
Excessive force is not required.
Replacing lens
Reposition lens and secure with the two
screws.
Belt replacement
The belt on your Hoover cleaner causes
the agitator to rotate and is important for
the effective operation of the cleaner,
The belt is located under the bottom
plate of the cleaner and should be
checked from time to time to be sure it is
in good condition,
When to replace
Disconnect cleaner from electrical
outlet.
To check belt, remove bottom plate as
shown in "How to replace." Replace belt
if it is stretched, cut or broken.
What to buy
To assure effective operation, use only
genuine HOOVER belts with your cleaner.
When purchasing a new belt, ask for
HOOVER part No. 38528033.
How to replace
Disconnect cleaner from electrical
outlet.
Removing bottom plate
Place handle in low position and turn
cleaner over so bottom side is up,
Remove the 4 screws as shown with a
Phillips screw driver,
Lift off bottom plate (A).
Removing belt
Remove agitator brush roll and used belt.
Discard used belt
Installing new belt
With letterino on outside of belt and
Replacing agitator- brush roll
In_rt _lNit_lt_r thr_tJ_h h_lt _1n¢] nla_ h_lt
Securing agitator
Clr_¢r_ _l_it_lt_r fir_l\l _nrl fit it imt_
Loading ...
Loading ...