Loading ...
Loading ...
Loading ...
35
REPLACING THE OVEN LAMPS
WARNING: Ensure the appliance is switched off before replacing the lamp to
avoid the possibility of electric shock.
■ Let the oven cavities and the heating elements to cool down;
■ Switch off the electrical supply;
TOP RIGHT LAMP (TOP AND BOTTOM MAIN OVEN):
■ Remove the protective cover C (fig. 29);
■ Unscrew and replace the bulb B with a new one suitable for high
temperatures (300°C) having the following specifications: 230-240V
50 Hz, E14
and same power (check watt power as stamped in
the bulb itself) of the replaced bulb.
■ Refit the protective cover;
LEFT LAMP (BOTTOM MAIN OVEN ONLY):
■ Remove the left wire rack and the side catalytic panel by unscrew-
ing the fixing screws.
■ Press down from the top the protective cover A (fig. 29) and remove
it by rotating on the lower side. IMPORTANT: never use screwdrivers
or other utensils to remove the cover A. This could damage the enam-
el of the oven or the lampholder. Operate only by hands.
■ Unscrew and replace the bulb B with a new one suitable for high temperatures
(300°C) having the following specifications: 230-240V 50 Hz, E14
and same power
(check watt power as stamped in the bulb itself) of the replaced bulb.
■ Refit the protective cover A operating in reverse order. ATTENTION: the notch in
the inner edge of the cover must be oriented toward the lamp.
■ Assemble the left wire rack and the side catalytic panel with the arrow up.
NOTE: Oven bulb replacement is not covered by your guarantee.
A
B
B
C
1
2
A
A
Figure 29
Loading ...
Loading ...
Loading ...