Loading ...
Loading ...
Loading ...
SPECiFiC SAFETY NSTRUCTJONS
FOR THE DRILL PRESS
14 SECURE WORK. Use damps or a vise to hold the
work when pract}caL ft's safer than using your hand
and ff frees both hands to operate tool
R_r your _n sabLv, _ not try to use your ddit press
or plug i_in until ff is completely &ssembled and isstailed
a_o_ing © the i_stmctions, arm uctil you have read and
u this instrd_on manual:
15.
WHEN using a ddll press vise, always fasten to the
_Me.
16. P_AKE SURE aH clamps and _ocks are firmly
2.
3_
YOUR DR_LL PRESS _UST BE 8OLTE# securely
_e a workbench. _nadditioe, if there is any tendency
for your ddl_ press to move during certain operations
bolt the workbench to the floo£
THiS DRILL PRESS is intended for use tn dry
conditions, indoor use oniyo
WEAR EYE PROTEO[ION. USE race or dust mask
a_ong with safe_ goggles ff ddlJing operation is dusty_
USE ear prote_ore, esp_ialIy dudng extended periods
4 DO NOT wear #Joves, neckties or I_se c_othing.
5 DO NOT tr_ to dril_ materia_ too small m be securely
held.
6 ALWAYS keep hands out ot tb_ path of a drill bit.
Avoid awkward hand positions where a sudden slip
coupe cause your hand to move into the dd_ bit.
7_
DO N_ install or use any drill bit that exceeds
175 mm _7") in length or ex_ends 150 mm {6"} be{ow
the chuck }aws_They can suddenly bend outward o_
break
8. _ NOT USE wire wheels router b_ts sneer c_ers
circ_e (fly) cubers, or rotary p_aners on th_s dr#| pre_
9. WNE_ t cu_ing a large piece of mateda_ make sure it
_sfu#y supported at the table height.
I0. DO NOT pedorm any o#eration _reehand, ALWAYS
ho_dthe workpiece firm{y a£ainst the tame se it will
r_o[_ck or twist. Use c_amps or a wse for unstable
_vorKi )i_es.
_ _A_.E SUR_ there are no na_s _r _oreign objects in
the part ot the wor_piece to be dd_led,
2. C_P WOR_P_ECE OR BRACE against the _e/t
side ot the column to prevent rotation, ff it is t(_ shod
or the table is fl_tedoc_amp solidly to the table and
use the fence provided.
17.
18.
19.
20.
21.
22,
SECURELY LOC_ THE HEAD and fable support to
the column, and the taMe 'to the table support before
o_ratin_ the drill press.
NEVER turn your ddll press on before deadng the
taMe of a_l objects (tools, scraps of wood, etc.)
BEFORE STARTING the operation, jog the motor
switch to q_ake sure the ddH bit does not wobble or
vibrate,
LET TR_ SPINDLE REACH FULL SPEE# before
Starting to rid& ff yourdd_! press makes an unfamiliar
noise or ff it vibrates excessively, stop immediately,
turn the dd_l pre_ off and unplug. Do not restart until
the proMem is corrected
DO NOT pediorm _ayout assemMy or set up work on
the table while the ddtl press is in operation.
USE RECOMMENd# _EED for dntl accessory and
matedaL SEE t NS that come
23.
WHEN DRILUNG large diameter ho}es, clamp the
woCKpiece firmly to the table. Otherwise, the b_ may
grab and spin the workpiece at high speed. DO NOT
USE fly c_e_ or multiple-part hole cubers, as they
can come _art or become unbatan_ in use.
24° _AKE 8NR_ the spind}e has come to a complete
stop before toucMng the workp_ece.
25. _ AVO_# I_NJURY from accidenta_ starting, aiways
turn _e switch "OFP ano unplug the dd_ press before
installing or removing any accessory or a#.achmenl
or making any adjus_mento
26. _EP GUARDS _N PLACE and in working order.
27. _8E ONLY SELFoEJECT_NG _P_ CHUC_ _EY as
provided with the ddll press.
_, _FTHE WOR_P_KCK overhangs the tame such Ihat
it will fa_ or t_# _1not he_d, c_amp it to the ,taMe or
provide auxiliary suppor_,
SAVE THESE NSTRUCT ONS
Loading ...
Loading ...
Loading ...