Loading ...
Loading ...
Loading ...
For your own safety, turn switch "OFF" and remove plug
from power source outlet before maintaining or
lubricating drill press.
Blow out or vacuum saw dust or metal shavings that
accumulate in and on the motor,
Apply a light coat of paste wax to the column and to the
table to help keep these surfaces clean and rust-free.
Lubricate the chuck and quill assembly periodicalJy.
Squirt or wipe a thin film d JightweJghtmachine oil on the
outside of the spindle shaft and the iaws of the chuck.
Raise and lower the quill and jaws to distribute the oil
evenly, The bali bearings are grease packed at the factory
and reauire no additional lubrication.
CAUTION," All servicing of the drilJ press should be
performed by a qualified service technician.
Loading ...
Loading ...
Loading ...