Dji AGRAS T30 User Manual

Loading ...

AGRAS T30

User Manual

Multi-Aircraft Control Mode

The remote controller features a Multi-Aircraft Control mode, which can be used to coordinate the

operation of up to three aircraft simultaneously for greater efciency. It is recommended for large spray

areas. Users can switch control between different aircraft in the app to control individual aircraft.

Multi-Aircraft Control mode can only be used in Route operation mode. Make sure to complete

eld planning and related congurations before entering Multi-Aircraft Control mode, since

elds cannot be edited in Multi-Aircraft Control mode.

To avoid interference between operations, do not operate more than three groups within a

50m radius when using Multi-Aircraft Control mode.

Entering Multi-Aircraft Control Mode

1. Link up to three aircraft to the same remote controller according to the steps in Linking the Remote

Controller.

2. Close the settings after linking. The linked aircraft are listed on the left of the screen and sorted by

number.

Switch Control

Tap the status box of the corresponding number in the app. The upper right corner of its box turns red

to indicate the corresponding aircraft is selected. Aircraft that are not selected will have a blue triangle in

the upper right corner of its box.

Multi-Aircraft Operations

1. Tap , select multiple elds in the Fields tag, and drag the icon for each aircraft with a number to a

eld to bind the eld and aircraft. Set parameter congurations, add connection points if necessary,

and start operations.

2. Tap Start after invoking operations for all aircraft. To launch the aircraft individually, move the sliders

for each aircraft in the prompt. Move the slider at the bottom of the screen to make all aircraft take off

simultaneously.

3. Users can also select each aircraft successively to select a eld and operation.

4. If there is any emergency during operation, tap Pause to pause all the Route operations. All aircraft

will hover in place and can be controlled manually. Tap Resume to continue operations. Users

can push the pitch or roll stick to pause the operation of the selected aircraft without affecting the

operations of the other aircraft.

5. If any of the aircraft complete its operation before the others, users can tap “+” in the aircraft status

box to add a new operation for the aircraft. Repeat Step 1 to start a new operation if all aircraft have

completed their operations.

Multi-Aircraft Usage Notice

Make sure that obstacle avoidance is enabled to assist the aircraft to avoid each other during

operations.

When using Connection Routing, the planned connection route of each aircraft will only

circumvent the obstacles that are included in the eld of that aircraft.

Orchard Configuration operations, prescription maps, and spreading operations are not

supported in Multi-Aircraft Control mode.

Loading ...

Dji AGRAS T30 Spray Plane