Loading ...
Loading ...
Loading ...
©
2021 DJI All Rights Reserved.
33
AGRAS T30
User Manual
The battery level LEDs on the remote controller indicates the status while charging. See the table below
for details.
LEDs Description
Blink successively quickly The battery is being charged using a Quick Charge charger.
Blink successively slowly The battery is being charged using a normal charger.
Solid The battery is fully charged.
External Battery
Charge the external Intelligent Battery using the included AC power adapter and charging hub.
1. Place the battery into the charging hub, connect the AC power adapter to the charging hub, and
connect the charger to a power outlet (100-240 V, 50/60 Hz).
2. The charging hub automatically charges batteries in order according to the battery power levels from
high to low.
3. The Status LED blinks green when charging and turns solid green when fully charged. The charging
hub beeps when charging is complete. To stop the beeping, remove the battery or turn off the button
on the charging hub.
AC Power AdapterCharging Hub
Power Outlet
Fully charge and discharge the battery at least once every three month.
USB power supply port can be used to charge the mobile device of 5V/2A.
Status LED Description
Blinks Green Charging
Solid Green Fully charged
Blinks Red Battery charger error. Retry with an ofcial battery charger
Solid Red Battery error
Blinks Yellow Battery temperature too high/low. Temperature must be within
operating range (5°to 40°C (41°to 104° F))
Solid Yellow Ready to charge
Blinks Green Alternately Intelligent Battery not detected
Loading ...
Loading ...
Loading ...