Loading ...
Loading ...
Loading ...
LOCATION
• Install the refrigerator on a floor strong enough to
support it when it is fully loaded°
• Do not install it where the temperature will go
below 60°F (16°C) because it wil! not run often
enough to maintain proper temperatures.
• Do not install it next to your range, a heating vent
or where the sun will shine directly on it,
CLEARANCES
Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
I ,t
Sides .................................. 5/8" (t6 mm)
Top ........................................ 1" (25 mm)
Back ......................................... 1" (25 mm)
[tf built-in, allow 7/8" (22 mm) at top for hinge covers..]
tf the refrigerator is against a wall on either side,
allow the following door clearances:
For models up to and including 25, allow 3/4" (!9 mm),
For 27 models, allow 11/2"(38 mm).
ROLLERS
Adjustable rollers behind the base grille enable you to
move the refrigerator away from the wall for cleaning.
These rollers should be set so the refrigerator rests
firmly on the floor. To assure that the doors will close
automatically from a halfway-open position, there is a
built-in tilt from the front to the back of the cabineto Side-
by-side refrigerators also have specially designed door
hinges that lift both doors slightly when opened, allowing
the force of gravity to help close them securely°
To adjust the rollers:
• Remove the base
grille by grasping the
bottom of the grille
and pulling it out°
• Turn the roller adjusting
screws clockwise to
raise the refrigerator,
counterclockwise to
lower it,
• To replace the base grille,
line up the prongs on the
grille with the clamps on
the refrigerator and push
back until the grille snaps
into place.
7
Loading ...
Loading ...
Loading ...