Loading ...
Loading ...
Loading ...
TEMPERATURE IS TOO WARM OR THERE IS INTERIOR MOISTURE BUILD-UP
Check if... Then...
The air vents are blocked., Cold air circulates Locate air vents by using your hand to sense airflow and
from the freezer to the fresh food section and move all packages that block vents and restrict airflow.
back again through air vents in the wall dividing
the two sections,,
The doors are opened often. When the door is opened, warm humid air is allowed into
the refrigerator. The more the door is opened, the faster
the humidity builds up, and the more warm air the
refrigerator must cool,
The controls are not set properly, Set the temperature controls at "INITIAL SETTING."
Wait 24 hours for temperatures to stabilize or even out. If
the temperature is too cold or too warm, move the controls
one setting at a time,
A large amount of food has just been added Adding food warms the refrigerator, it can take a few hours
to the refrigerator or freezer, for the refrigerator to return to normal temperature°
The food is not packaged correctly,, Wrap food tightly and wipe off damp containers prior to
storing in the refrigerator to avoid moisture accumulation.
The doors are not aligned or not closing See "Doors will not close completely or are not aligned."
completely.
The weather is humid. In humid weather, air carries moisture into refrigerator
when doors are opened.
ICE HAS OFF-TASTE OR ODOR
Check if, o. Then.,,
The icemaker was recently installed, Discard first few batches of ice to avoid discolored or
off-flavored ice.
The ice has been stored for too tong, Throw away old ice and make new supply,,
The food has not been wrapped tightly in Rewrap foods since odors may migrate to the ice if food
either compartment, is not wrapped properly.
The water supply contains minerals such as sulfur A filter may need to be installed to eliminate taste and
odor problems°
The interior of refrigerator needs cleaning. See Care and Cleaning section,
DISPENSED WATER IS NOT COLD ENOUGH
Check if.o. Then.°.
The refrigerator has been newly installed. Allow 24 hours for the tank to cool completely,.
A large amount of water has been recently Allow 24 hours for the tank to cool completely.
dispensed,
No water has been recently dispensed. The first glass of water may not be cool. Discard the
first glass
25
Loading ...
Loading ...
Loading ...