Loading ...
Loading ...
Loading ...
STORAGE BIN (onsome models)
This removable tilt-out
bin can be located on the
fresh food or freezer
compartment door.
To open, push the latch up and pull the bin
handle forward.
To avoid damaging the refrigerator, make sure
the bin is closed and latched before closing the
refrigerator door°
To remove the bin,
lift it up and out of the
bin housing.
To remove the
Storage Bin unit, lift
the bin housing up and
out of the slots on the door,
To replace it, Iower the
hooks on the housing into
the slots on the door: You
do not have to remove the
bin from the housing when
moving the Storage Bin unit.
Bin Housing
ADJUSTABLE HUMIDITY DRAWERS
(on some modets)
These drawers have
individual, adjustable
humidity controls that
let you control the
amount of cold air
entering the drawers
Slide the controls all the way to HIGH setting and the
drawer provides higher humidity levels recommended
for most leafy vegetables,
Slide the controls all the way to LOW setting and the
drawer provides lower humidity levels recommended
for most fruits.
TO REMOVE STORAGE DRAWERS
Drawers wilt stop before
coming all the way out of
the refrigerator to help
prevent contents from
spilling onto the floor,.
Drawers can easily be
removed by tilting up
slightly and pulling past
"stop" location.
On some models you
may need to remove the
door bins from the fresh
food door before
removing the drawers.
When replacing the drawers
make sure you slide them
through the drawer guides
on the left side,,
If the door prevents you from taking out the drawers, the
refrigerator wil! need to be rolled forward until the door
opens enough to slide the drawers out. In some cases
when you roll the refrigerator out you will need to move
the refrigerator to the left as you roll it out.
16
Loading ...
Loading ...
Loading ...