Loading ...
Loading ...
Loading ...
12 | nuwavenow.com
COOKING FUNCTIONS
The Pause/Clear Function
To interrupt cooking time, press
Pause/Clear once. This will pause
the NuWave PIC Gold regardless of cooking
stage.
The temperature will remain listed in the
display panel, but the “F” will be blinking.
To resume cooking, press Start.
To clear the cooking mode or display
while the PIC Gold is in operation, press
Pause/Clear twice. The display will be fully
cleared and “0” will appear.
The Programming Function
(Stage Cooking)
1. Press Prog. “Pro” will appear on the
display.
2. Set the cooking temperature using the
preset temperature keys, from Low to
Max/Sear. To increase or decrease the
temperature, press - or +.
3. Press Time. “00:00” will be displayed,
then press - or + until the desired time
is reached. See Setting Cooking Time
for entering minutes and hours.
• To add additional stages, repeat steps
1 and 2 then press Start to begin the
program. You may program up to 10
stages (delay is considered a stage).
• To change any part of the program,
press Pause/Clear twice to start over.
Example: Boil for 5 minutes before
reducing to a simmer for 20 minutes:
Press Prog. Press Max/Sear. Press Time
once, and then press + until “00:05” is
reached. Press Med/Low. Press Time
twice, and then press + until “00:20” is
reached. Finally, press Start.
NOTE: The maximum programmable cook
time is 99 hours and 60 minutes.
The Delay Function
This function allows for set programs to start at
a later time.
1. To delay a program, press Prog.
2. Press Time. A “0” will ash in the
display.
3. Press + until the desired amount of time
to delay the program start is reached.
See “Setting Cooking Time” for more.
4. Press Prog again to set the cooking
program. The amount of time selected
for delay is included in the programmed
stages.
• To continue to the next stage,
enter the cooking temperature and
then continue with Step 2 from the
“Programming Function” instructions.
5. Once ready for the countdown to begin,
press Start. When the delay countdown
reaches “0”, the PIC Gold will beep
twice and the cooking time will start with
the cooking temperature displayed.
The Wattage Function
The default wattage of the PIC Gold is 1500
watts, which is adjustable to 900 watts and
600 watts.
1. Press Watts once. The red light will
illuminate above “600”, indicating that
the PIC Gold is now set to 600 watts.
2. Press Watts again. The red light above
“900” will illuminate, indicating the PIC
Gold is now set to 900 watts.
3. Press Watts once more and the red
light above “1500” will illuminate,
indicating that the PIC Gold is now set
to the default 1500 watts.
Loading ...
Loading ...
Loading ...