Loading ...
Loading ...
Loading ...
nuwavenow.com | 11
COOKING FUNCTIONS
To Start Cooking
There are several ways to begin
cooking with your PIC Gold.
1. Press Start. The defaults are 375°F for
1 hour.
2. Set the cooking temperature and press
Start. The default cooking time is 1
hour.
3. Set the cooking time and press Start.
The default cooking temperature is
375°F.
4. Set temperature and time, then press
“Start”.
• The PIC Gold will automatically stop
cooking once time has expired and the
PIC will beep.
• The display will always show current
temperature during the cooking cycle.
• To display time lapse, press “Time” and
a countdown will appear, marking the
duration before the cycle or stage is
complete.
Setting the Cooking Temperature
This appliance is preset to cook on
Med/High (375°F).
1. To reset, press the desired
temperature on the control panel then
press “Start”. The temperature range
will appear on the display.
2. To raise or lower the temperature in
10-degree increments, press “+” or
“-” until the desired temperature is
displayed.
Refer to the Preset Temperatures Chart on
page 8 for preset temperature information.
NOTE: Displayed temperature represents
the center temperature of 1.5L of oil in the
NuWave 3.5-quart Stainless Steel Pot.
Thermometer location was tested at the
origin (middle) of the NuWave 3.5-quart
Stainless Steel Pot at an equidistant length
between the pot base and the top of the oil.
Temperature Format: ºF to ºC
The PIC Gold defaults to displaying the
cooking temperature in degrees Fahrenheit
(F), but this can be changed to Celsius.
1. Press Prog.
2. Press - twice.
The display will change and temperature
will be displayed in Celsius. To return to
Fahrenheit, simply press - once more.
To close out of the F/C conversion option,
press Pause/Clear until a “0” appears on
the display.
Setting the Cooking Time
1. Press Time. “0” will flash in the far right
corner of the display.
2. Press + until the desired amount of
time is reached.
Example 1: To program 5 minutes, press
Time once, then press + until “00:05” is
displayed. Press Start.
Example 2: For 20 minutes, press
Time twice, then press + until “00:20” is
displayed. Press Start.
Example 3: For 2 hours and 30 minutes,
press Time twice, then press + until you
reach “00:30”, then press Time again.
Press + until “02:30” is displayed, then
press Start.
• The blinking “0” indicates the digit you
can adjust. The maximum time is 99
hours and 60 minutes.
• The display shows hours and minutes,
but not seconds.
Loading ...
Loading ...
Loading ...