Loading ...
Loading ...
Loading ...
9
II. Installation and Operating Instructions
WARNING
• The appliance must be installed in accordance with applicable national, state, and
local codes and regulations.
• Failure to install, operate, and maintain the appliance in accordance with this
manual will adversely affect safety, performance, component life, and warranty
coverage and may result in costly water damage.
• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are
securely in place after installation. Make sure that none have fallen into the ice
storage bin.
A. Location
NOTICE
• The appliance is not intended for outdoor use. Normal operating ambient
temperature must be within 45°F to 100°F (7°C to 38°C); Normal operating
water temperature must be within 45°F to 90°F (7°C to 32°C). Operation of the
appliance, for extended periods, outside of these normal temperature ranges
may affect appliance performance.
• The appliance will not work at sub-freezing temperatures. To prevent damage
to the water supply line, drain the appliance if the air temperature is going to go
below 32°F (0°C). See "IV. Preparing the Appliance for Periods of Non-Use."
• Opti-Serve Model (-OS): Sunlight, direct and indirect, can have an effect on the
operation of the dispense sensors. If a problem is noticed, the appliance should
be moved out of direct sunlight and/or farther away from any outside windows.
• The appliance should not be located next to ovens, grills, or other high heat producing
equipment.
• Allow 6" (15 cm) clearance at rear and left side, 10" (25 cm) at right side, and 20"
(51 cm) at top for proper air circulation and ease of maintenance and/or service should
they be required.
• The location should provide a rm and level foundation for the appliance.
Loading ...
Loading ...
Loading ...