Hoshizaki DCM270BAH User Manual

Loading ...

H. Startup

WARNING

All parts are factory-adjusted. Improper adjustments may adversely affect safety,

performance, component life, and warranty coverage.

NOTICE

• If the appliance is turned off, wait for at least 3 minutes before restarting the

appliance to prevent damage to the compressor.

• At startup, conrm that all internal and external water connections are free of

leaks.

1) Make sure the power switch is in the "OFF" position, and the appliance is unplugged

from the electrical outlet.

2) Open the water supply line shut-off valve. See Fig. 3.

3) Remove the louver and air lter. Move the control switch to the "ICE" position. Replace

the louver and air lter in their correct positions.

4) Plug the appliance into the electrical outlet. Move the power switch to the "ON" position

to start the automatic icemaking process.

5) Once the appliance starts to produce ice, allow it to run for 30 minutes.

6) After 30 minutes, while the appliance is energized, remove the front panel. On the

push-button model, disconnect the connector (5VDC). Next, remove the top panel.

7) Conrm bin control operation. Lift the balance plate located on the bin top until the

microswitch lever lifts and microswitch opens. See Fig. 4. 90-second compressor

shutdown timer starts. Once the 90-second compressor shutdown timer terminates,

compressor de-energizes and the 60-second gear motor shutdown timer starts. Once

the 60-second gear motor shutdown timer terminates, gear motor de-energizes.

Release the balance plate back to its correct position.

Balance Plate

Microswitch

Microswitch Lever

Fig. 4

Loading ...

Hoshizaki DCM270BAH Coffe Maker