Loading ...
Loading ...
Loading ...
28
Belt/Deck Lubrication Procedure
First, you want to clean between the belt and deck to remove any debris that may be trapped. Use a
clean, non-fraying rag, t-shirt, or light towel. Halfway between the end of the treadmill and motor cover,
shove the garment under the belt until you can grasp it on both sides of the belt. Drag the garment the
length of the entire belt 1-2 times. Remove the garment.
Do not lubricate with anything other than Spirit Fitness approved lubricant. Your treadmill comes with
one tube of “Lube” and extra tubes can be ordered directly from Spirit Fitness or your authorized Spirit
Fitness dealer. You may also use a Lube-n-Walk kit that can be purchased through both aforementioned
sellers.
Keeping the deck lubricated at the recommended intervals ensures the longest life possible for your
treadmill. If the lubricant dries out, the friction between the belt and deck rises and places undue stress
on the drive motor, drive belt and electronic motor control board, which could result in catastrophic
failure of these expensive components. Failure to lubricate the deck at regular intervals may void the
warranty.
The belt & deck come pre-lubricated and subsequent lubrication should be performed every 180
hours of use or if you notice that the deck is dry. It is recommended that you reach between the belt
and deck to verify there is lubrication present, every other month. If you check and there isn’t any
lubrication present, follow the procedure below even though the “Lube” indicator isn’t
lit on the console. Otherwise, lubricate when the console’s lubrication reminder lights after 180 hours
of use. Use the following procedure to apply the silicone lubricant:
Loading ...
Loading ...
Loading ...