Loading ...
Loading ...
Loading ...
Copyright Planika Sp. z o.o. www.planikafires.com IG0031#05 10.10.2019 37
9. PRESSURE ADJUSTMENT
Do not attempt to remove screws from the top of gas valve. Do not change any adjustments marked with
tamper indicating paint. Motor knob is not to be removed.
Pilot Flame Adjustment
The pilot flow adjustment is preset to maximum at the factory. The pilot flame should envelope ⅜
to ½ of the thermocouple
o The adjustment screw can be reached through a hole in the MANUAL knob (see figure 21).
o Turn the MANUAL knob to the ON position.
o It is now possible to pierce through a film on the cover with a screwdriver to reach the
adjustment screw beneath.
o Turn the adjustment screw clockwise to decrease or counterclockwise to increase pilot flame.
Loading ...
Loading ...
Loading ...