Planika ROUGALINSAUT User Manual

Loading ...

WARNING!!!

• After making sure that the device has been correctly installed acquaint yourself with the attached User’s

Manual.

• Only after acquainting yourself with the User’s Manual and correctly attaching the gas linkage may you start the

device.

• If in future a need arises of having to take the insert out of the housing it may only be done when the device is

turned off and cooled down and the valve on the gas cylinder is closed.

• Keep this instruction manual for the lifetime of the device.

4.3 Installation of the gas linkage

Warning!!! The montage and service needs to be conducted by a qualified professional, a company or the gas

supplier.

Before proceeding with the connection of the gas cylinder to the fireplace all activity regarding the correct placement

and installation of the GaLiO Fire Pit Insert needs to be already performed. Place the gas linkage away from hot or

sharp edges and make sure it is not twisted.

4.5.1 Natural gas connection

First and foremost, make sure that the connecting device is designed to supply a gas suitable for the type placed in

the gas installation. All necessary information regarding the desired parameters of the gas are found on the rating

plate of the device. Before connecting the gas supply, it is necessary to blow them to remove any remaining metal

filings and other contaminants from inside. Automatic gas control system should be protected from moisture and dust.

These factors may cause irreparable damage to the individual components. The pipe supplying gas to the fireplace

should be equipped with a ball valve with a recommended diameter of 1/2 inch. The individual elements of the gas

installation cannot be sealed using Teflon tape or PTFE tape.

The gas valve on the gas pipe must be installed in accordance with applicable national regulations. Before connecting

the gas, make sure that the gas pipes and connections have no dirt. Gas connection is finished with external thread

3/8 ". Regarding gas connection, the following requirements shall apply:

• You must use the gas pipe with the correct dimensions, so there is no pressure loss.

• Ball gas valve should be installed in an easily accessible place.

4.5.2 Connection and replacement of the gas cylinder (LPG version)

The GaLiO Fire Pit Insert is delivered together with an elastic gas linkage which, on one end is connected to the valve

of the device and on the other end to the 37mbar regulator (in the twist-on version) ready to be connected to the gas

cylinder. One needs to control the expiry date of both of the regulator as well as the gas linkage and if necessary (for

instance: broken, cut, scratched linkage) replace the components for new ones according to national standards and

norms.

Loading ...

ROUGALINSAUT Planika Round Galio Outdoor Gas Fire Pit Insert Only