Planika ROUGALINSAUT User Manual

Loading ...

5.4.1 Switch the Fire ON and OFF

Before operating make sure MANUAL knob on the GV60 valve is in the ON, full counter clockwise position.

WARNING! When the pilot light is ignited, the motor turns automatically to maximum flame height. If the pilot flame

goes out for any reason, wait for 5 minutes before attempting to re-light it. If the pilot does not stay lit after several

tries, turn the main valve knob to OFF.

1. Open the valve of the gas cylinder (or gas supply

valve in the gas pipe).

2. Press button until two short beeps confirms

the start sequence has begun; release button.

3. Main gas flows once pilot ignition is confirmed.

4. Handset automatically goes into Manual Mode

after main burner ignition.

5. Press and hold button to turn OFF the fire.

 This can take few seconds to ignite to pilot flame especially when you have replaced and installed a new LPG gas

cylinder.

 If the pilot light does not ignite after 3 ignition attempts close the gas tap and warn the fitter.

 Once the pilot light is burning, the main burner must ignite within 10 seconds automatically. If this does not

happen, immediately close the gas tap and warn the fitter.

 If the main burner ignites with a pop immediately close the gas tap and warn the fitter.

 If the appliance is not to be used for some time, please close the gas supply valve in the gas pipe (or valve of the

gas cylinder).

 WARNING! If the pilot flame goes out for any reason wait for 5 minutes before attempting to re-light it.

Loading ...

ROUGALINSAUT Planika Round Galio Outdoor Gas Fire Pit Insert Only