Loading ...
Loading ...
Loading ...
Copyright Planika Sp. z o.o. www.planikafires.com IG0031#05 10.10.2019 34
7. MAINTENANCE AND UPKEEP
We recommend cleaning the pilot flame and the main burner unit before the device is started again after its
been removed from storage during the winter period.
7.1 Testing and cleaning
Please check and clean if necessary:
The main burner - if necessary, remove broken parts of stones and the existing dust.
Pilot burner and thermo-couple (if necessary, remove the existing sediment). In the event of visible damage
contact your dealer.
Igniter - gap between igniter and pilot flame should not be bigger than 5 mm.
Glass screens – check for dirt smudges or possible scratches or cracks. If cracks are present replace the glass
screen for a new one. To conduct this contact your dealer.
Gas linkage and pressure regulator (in case their expiry date is invalid replace these ancillaries for new ones).
If you encountered problems with the regulator, gas linkage, burner or regulation valves do not try to fix these
parts. Contact a sales person, an authorised service or an importer in order to acquire spare parts. To ensure
the device is working efficiently use only original spare parts.
7.2 Glass cleaning (if optionally installed)
Most of the existing types of smudges may be wiped with a dry cloth. In case of more substantial smudge you may use
liquids normally applied to ceramic tiles or windows. Always dry the glass screen to avoid damp patches which could
irreversibly embed into the glass.
Warning!!! Avoid leaving fingerprints on the glass. They will be embedded into the glass and you will not be able to
clean them.
Loading ...
Loading ...
Loading ...