Loading ...
Loading ...
Loading ...
4141
STAINLESS STEEL, ALUMINIUM PARTS, PAINTED AND SILK-SCREEN
PRINTED SURFACES
Clean using an appropriate product.
Always dry thoroughly.
IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abrasion.
You are advised to use a soft cloth and neutral soap.
CAUTION: Do not use abrasive substances or non-neutral detergents as these will
irreparably damage the surface.
ENAMELLED PARTS
All the enamelled parts must be cleaned with a sponge and soapy water or other non-
abrasive products.
Dry preferably with a microbre or soft cloth.
Acidic substances like lemon juice, tomato sauce, vinegar etc. can damage the enamel if
left too long.
INSIDE OF OVEN
■ The oven should always be cleaned after use when it has cooled down. Let the oven
cool down and pay special attention no to touch the hot heating elements inside
the oven cavity.
■ The cavity should be cleaned using a mild detergent solution and warm water.
■ Suitable proprietary chemical cleaners may be used after rst consulting with the
manufacturers recommendations and testing a small sample of the oven cavity.
■ Abrasive cleaning agents or scouring pads/cloths should not be used on the cavity
surface.
■ NOTE: The manufacturers of this appliance will accept no responsibility for damage
caused by chemical or abrasive cleaning.
Do not store ammable material in the oven.
GRILL HEATING ELEMENT
■ The heating element is self-cleaning and does not require maintenance.
CLEANING THE CIRCULAR WELL ON THE FLOOR OF THE OVEN
After using the Easy Steam and Hydroclean functions, you are advised to clean and dry the
circular well on the oor of the oven.
All enamelled parts must be cleaned using a sponge and soapy water or other suitable non-
abrasive products.
Dry with a soft cloth.
Loading ...
Loading ...
Loading ...