Loading ...
Loading ...
Loading ...
1616
USE AND CARE
CAUTION:
■ This appliance must be used only for the task it has explicitly been designed for, that
is for domestic cooking of foodstus. Any other form of usage is to be considered as
inappropriate and therefore dangerous.
■ Do NOT place combustible materials or products on this appliance at any time.
Figure 10bFigure 10a
Click
A
A
Traverso posteriore Arresto di sicurezza
1°
Livelli
2°
3°
4°
5°
6°
7°
Levels
Guard rail
Stop notch
USING THE OVEN FOR THE FIRST TIME
OVEN FITTING OUT
Fit the side racks
■ Slide the rear prongs of the side rack into the holes “A” at the rear of the oven (g. 10a).
■ Slide the front prong of the side rack into the hole at the front of the oven (g. 10a).
■ Slide in, on the guides, the shelf and the tray (g. 10b).
The shelf must be tted so that the safety notch, which stops it sliding out, faces the
inside of the oven; the guard rail shall be at the back.
■ To dismantle, operate in reverse order.
■ NOTE: When using the oven for the rst time, in order to eliminate any traces of
substances or odours left over from the production process, switch the oven on and
run it empty (without the accessories, which should be washed separately), keeping
the installation environment suciently ventilated:
• for 60 minutes in the position
(thermostat in position 250°C);
• for 30 minutes in the position
(thermostat in position 250°C);
• for 15 minutes in the position
(thermostat in position 200°C).
■ Slide o the wire racks from the oven walls as in g. 10a;
■ Let the oven cool down, switch o the electrical supply, then clean the inside of the
oven with a cloth soaked in water and neutral detergent and dry thoroughly.
Loading ...
Loading ...
Loading ...