Loading ...
Loading ...
Loading ...
1010
FIXING THE OVEN
Introduce the oven into the furniture opening and x it with 2 screws (not supplied) as gure 5.
Before xing the 2 screws, check the 2 plastic bushes are correctly in place into the xing
holes (the bushes are already tted on the product and must lie at).
It is essential that the oven rests on a surface which will support its weight, as the screw
xing is only complementary.
Note:
It is essential that when installing your oven adequate air circulation is allowed for within the
installation. See gures 1, 2, 3 and 4.
Inadequate air circulation may greatly impair the performance of your oven and may eect
adjacent cabinets due to an increase in temperature.
Caution!
Do not lift this oven by the door handle.
Adjust the hinges of furniture doors adjacent to the oven to allow a 4-5 mm gap between
the furniture door and the oven frame.
IMPORTANT (only for the models NSM 9 ..,
NSM 11 ..): When handling the oven, take
care not to damage the door sensor lever
“L” (g. 6) (near the top left corner of the
oven seal).
L
Figure 6
Figure 5
Loading ...
Loading ...
Loading ...