Loading ...
Loading ...
Loading ...
6
5/16" screws
Top hinge
Phillips screws
Center hinge
pin
Center hinge
bracket
5/16"
hex nut
Center hinge
3/8"
screws
Bottom hinge
Plug
(some models)
Door closure
(some models)
Door closure
(some models)
!
CAUTION
Protect soft vinyl or other flooring with cardboard, rugs
or other protective material to avoid property damage.
9. Reverse doors as necessary by performing the
following steps:
• Remove button plugs from opposite side of
refrigerator cabinet using putty knife covered with
masking tape. Insert button plugs in holes left from
hinge removal.
• Remove freezer door internal support rod located
underneath freezer handle. Reinstall internal
support rod in hinge hole on opposite side of door.
10. Rehang doors by replacing bottom, center, and top
hinges, along with freezer and refrigerator doors on
opposite side of refrigerator performing steps 2-8 in
reverse order.
• Use a penny at top to space door
3
/4" (18 mm)
from cabinet.
• Handle side of door should be approximately
1
/8" (3 mm) higher than hinge side.
3/4"
(18 mm)
1/8"
(3 mm)
11. Replace freezer door handles.
Models with freezer handle cap.
• Mount handle to opposite side of door using
mounting screws removed in previous step.
• Angle front edge of handle cap downward toward
back lip of freezer handle. Verify bottom tab on
freezer cap slides under rear lip of freezer handle.
Snap rear edge of handle cap in place. Place 2
button plugs in empty mounting holes.
Handle
cap
Freezer
handle
Screws
Models without freezer handle cap.
• Place hinge shim on non-hinge side of door. Large
hole in hinge shim must line up with hole created
from hinge reversal.
Hinge hole
Freezer handle
shim
• Replace freezer handle on non-hinge side of door
with screws previously removed.
Loading ...
Loading ...
Loading ...