Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
92
The holes for securing the connect-
ing bracket to have to be pre-
drilled.
Push the connecting bracket with
cut-outs over the holders for the
wall spacers.
Use a pen to mark the position of the
drill holes.
Then take the connecting bracket
off again.
Drill through the panel only. Drilling
depth approx. 1mm.
Drill the screw holes with a 3mm bit
and then file any rough edges
smooth.
Place connecting bracket with the
horizontal long slot on the left-hand
side and secure it as follows:
1. Secure it loosely with screw.
2. Adjust the connecting bracket until
its centre piece abuts against the
side of the second appliance.
3. Secure the connecting bracket us-
ing screw.
4. Now tighten the loose screw and as
you do so push the right-hand appli-
ance up against the left-hand appli-
ance.
Loading ...
Loading ...
Loading ...