Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
82
–Fitting the soft-close mechanism
Insert the soft-close mechanism
on the door hinge side (at an angle
initially) so that it clicks into position.
Then press the other end of the soft-
close mechanism into the opening.
Secure the soft-close mechanism
with the screw.
Push the hinged arm into the
opening on the door hinge.
Insert the pin into the door hinge
from above. Turn this with a screw-
driver (by approx. ¼turn) until both
lugs on the pin click into position cor-
rectly in the grooves.
Pull out the red safety device.
Tip: Keep the red safety device in case
you want to change the door hinging
again at a later date.
Fit the cover on the door hinge.
Fit the panel so that it clicks into
position.
1
Push on the outer cover.
Close the appliance door.
Loading ...
Loading ...
Loading ...