Loading ...
Loading ...
Loading ...
Operating the Self-Cleaning Oven
(continued)
How to Set Delay Start of Cleaning
(on some models)
Quick Reminder:
1. Latch the door.
2. Turn the Oven Set knob to CLEAN.
3o Press the START TIME ON/OFF pad_
4. Press the HOUR and MIN. pads to set the time of
day you want cleaning to start. The self-clean cycle
will automatically begin at the time you selecte&
Defay Start is setting the oven to start the clean cycle
automatically at a later time than the present time of day,
For example: Let's say it is 7:00 and you want the oven
to begin self-cleaning at 9:00 after you're finished in the
kitchen, The oven is just soiled a normal amount so the
normal Clean Time of 4 hours and 20 minutes is
preferred,
1. Follow steps to prepare the oven for cleaning.
2. Slide the latch handle to the right as far as it will go.,
Never force the latch handle.
Forcing the handle will
damage the door lock
mechanism.
3, Turn the Oven Set knob to the
CLEAN position.
4. Press the START TIME ON/OFF pad.
5. Press the HOUR pad until 9:00 appears in the
display. The timer is now set to start cleaning
in 2 hours, at 9:00°
The self-clean cycle wilt be set to automatically begin
at 9:00 and finish at I:20.
Both the OVEN ON light and the CLEAN light witl flash
when the Clean Time is finished.
6, When the CLEAN light flashes, slide the latch handle
to the left as far as it will go, turn the Oven Set knob
to OFF and open the door,
Never force the latch handle. Wait until the CLEAN
light flashes and the latch slides easily. Forcing the latch
handle may damage the door lock.
Questions and Answers
Q, Can 1use commercial oven cleaners on any part
of my self-cleaning oven?
A_No cleaners or coatings should be used around any
part of this oven_ If you do use them and do not
thoroughly rinse the oven with water, wiping it
absolutely clean afterwards, the residue can scar the
oven surface and damage metal parts the next time
the oven is automatically cleaned
Q. What should I do if excessive smoking occurs
during cleaning?
A. This is caused by excessive soil. Turn the Oven Set
knob to OFE Open the windows to rid room of smoke
Wait until the CLEAN light goes off. Wipe up the
excess soil and reset the clean cycle,
Q. is the "crackling" or "popping" sound 1hear
during cleaning normal?
A. Yes This is the sound of the metal heating and cooling
during both the cooking and cleaning functions
Q. Should there be any odor during the cleaning?
ANYes, there will be an odor during the first few
cleanings, Failure to wipe out excessive soi! might
also cause a strong odor when cleaning.
Q. Why do I have ash left in my oven after cleaning?
A. Some types of soil will leave a deposit which is ash.
It can be removed with a damp sponge or cloth
Q. If my oven clock is not set to the correct time of
day, can I still self-clean my oven?
A, if the clock is not set to the correct time of day,
you wit! not be able to set a delay clean to end at a
specific time.
Q. What causes the hair-like lines on the enameled
surface of my oven?
A, This is a normal condition, resulting from heating and
cooling during cleaning. These lines do not affect how
your oven performs°
Q. Can I cook food on the cooktop while the oven is
self-cleaning?
A, Yes While the oven is self-cleaning, you can use the
cooktop just as you normally do.
Q. The CLEAN light flashes when 1set the clean
cycle. What's wrong?
A. The CLEAN light will flash until the latch is
moved to the right.
Q. Can ! clean the woven gasket around the
oven door?
A, No, this gasket is essential for a good oven seal,
and care must be taken not to rub, damage or move
this gasket.
28
Loading ...
Loading ...
Loading ...