Loading ...
Loading ...
Loading ...
ww w.drilldoctor.com 9
e) Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventative safety measures reduce the risk of
starting the power tool accidentally.
f) Store idle power tools out of reach of children and do
not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users.
g) Keep cutting tools sharp and clean for better and safer
performance.
h) Follow instructions for lubricating (if applicable) and for
changing accessories.
i) Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other condition
that may affect the power tool’s operation. If damaged, have
the power tool repaired by an authorized service center
before use. Keep handles dry, clean and free from oil and
grease. Many accidents are caused by poorly maintained
power tools.
j) Inspect tool cord periodically and if damaged have
it repaired by an authorized service center. Inspect
extension cords periodically and repair if damaged.
k) Keep guards in place and in working order. A guard or
other part that is damaged should be properly repaired or
replaced by an authorized service center unless otherwise
indicated in the instruction manual.
l) Never stand on the power tool. Serious injury could
occur if the tool is tipped or if the sharpening edge is
unintentionally contacted.
m) Check damaged parts. Before further use of the tool,
any part that is damaged should be carefully checked to
determine that it will operate properly and perform its
intended function. Check the alignment of moving parts,
binding of moving parts, breakage of parts, mounting and
any other conditions that may affect its operation. Any
damaged part, including the switch, should be properly
repaired or replaced by an authorized service center.
n) Do not use if the grinding wheel is damaged. Use only
grinding wheels recommended by Drill Doctor
®
Loading ...
Loading ...
Loading ...