Loading ...
Loading ...
Loading ...
ww w.drilldoctor.com6
a) Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is earthed or
grounded.
c) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Never yank the cord
to disconnect it from the socket. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
d) Use proper extension cord. Use only 3-wire extension
cords that have 3-prong plugs and 3-pole receptacles that
accept the power tool’s plug. Make sure your extension cord
is in good condition. When using an extension cord, be sure
to use one heavy enough to carry the current your product
will draw. Use marked outdoor extension cord leads when
the tool is used outdoors.
e) Disconnect tools. Always disconnect your power tool when
cleaning, inspecting, and changing accessories. When not in
use, disconnect from the power supply. Never touch internal
parts of the sharpener when it is turned on or plugged in.
The rotating diamond wheel can result in injury.
f) Grounding instructions. In the event of a malfunction or
breakdown, grounding provides a path of least resistance for
electric current to reduce risk of electric shock. This power
tool is equipped with an electric cord having an equipment-
grounding conductor and grounding plug. Do not modify
the plug provided. The plug must be plugged into a matching
outlet that is properly installed and grounded in accordance
with all codes and ordinances. Improper connection of
the equipment-grounding conductor can result in a risk of
electric shock. The conductor with insulation having an outer
surface that is green with or without yellow stripes is the
equipment-grounding conductor. If repair or replacement
of the electric cord or plug is necessary, do not connect
the equipment-grounding conductor to the live terminal.
Check with a qualified electrician or service personnel if the
grounding instructions are not completely understood, or if
in doubt as to whether the tool is properly grounded. Repair
or replace damaged or worn cord immediately.
g) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
Loading ...
Loading ...
Loading ...