Loading ...
Loading ...
Loading ...
ww w.drilldoctor.com 13
Noise and Vibration Emissions Values
Manufacturer: Darex, LLC
Model: DD500X/DD750X
Noise Emissions:
L
d
=L+K, where the maximum K = 3.0dB (per ISO 11201)
Declared value according to ISO 4817 at operator’s position:
No load Lpa = 76.9 Loaded Lpa = 89.7
Measured Value according to ISO 3744 (half-sphere):
No load Lpa = 72.0 Loaded Lpa = 75.0
Vibration Emissions:
Measured vibration during normal work 1.9m/s
2
; K = 1.5m/s
2
U
(per ISO 5349 and ISO 5349-2)
Note#1: The declared vibration total value has been measured
in accordance with a standard test method and may be used for
comparing one tool to with another.
Note #2: The declared vibration total value may also be used in a
preliminary assessment of exposure.
⚠WARNING! The vibration emission during actual use of the
power tool can differ from the declared total value depending on
the ways in which the tool is used.
⚠WARNING! Identify safety measures to protect the operator
based on an estimation of exposure in actual conditions of use.
Intended Uses
• This drill bit sharpener is designed to sharpen twist style drill bits
3/32” - 1/2”. (DD750X will sharpen up to 3/4”.)
• Sharpening drill bits in the home or small shop.
• Use in clean and dry environments
• Use with a clean power source of the correct rated voltage and cycle.
Unintended Uses (Not permissible)
• This drill bit sharpener is not intended to sharpen chisels, screw
drivers or other similar shop tools.
• This sharpener is not intended for industrial or commercial
sharpening services.
• Not for use in wet and/or hazardous environments.
• Not for use with converters or alternate power supplies.
Loading ...
Loading ...
Loading ...