Loading ...
Loading ...
Loading ...
ww w.drilldoctor.com8
e) Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
f) Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations. Nonslip footwear is recommended.
g) Dress properly. Wear closed, non-flammable protective
clothing. Do not wear loose clothing or jewelry. Keep your
hair, clothing and gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in moving parts.
h) Secure Work. Use clamps or a vise to hold work when
practical. It’s safer than using your hand and it frees both
hands to operate tool.
4. Power Tool Use and Care
⚠ WARNING! Use recommended accessories. Use the power
tool, accessories, abrasives, and tool bits etc., in accordance
with these instructions, taking into account the working
conditions and the work to be performed. Use of the power tool
for operations different from those intended could result in a
hazardous situation.
⚠ CAUTION! Keep power tools and work space clean for
best performance and safety. Do not let sharpening debris
accumulate on, in, or around the tool. Accumulated fine metal
sharpening debris can be very hot and may present a fire danger
if the machine or your workspace is not properly cleaned and
maintained. Accumulated sharpening debris can also degrade the
life of the tool and cause premature wear on some components. If
sharpening debris has accumulated, do not immediately throw it
into a trash receptacle without ensuring the debris is completely
cool and free of heat. Improperly disposing of the accumulated
sharpening debris may present a fire risk. Do not collect the
sharpening debris during sharpening. This increases the risk of
heat build-up in the debris and the potential for fire.
a) Do not force the power tool or attachment. Use the
correct power tool for your application. Do not force small
tools to do the job of a heavy duty tool. The correct power
tool will do the job better and safer at the rate for which it is
designed.
b) Use the right tool. Do not force tool or attachment to do a
job for which it is not designed.
c) Do not use the power tool if the switch does not turn it
on or off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
d) Never leave tool running unattended – Turn power off.
Do not leave the tool until it comes to a complete stop.
Loading ...
Loading ...
Loading ...