Loading ...
Loading ...
Loading ...
ww w.drilldoctor.com 11
12
12
14
0
115V
0-25
(0-7.6m)
101-200
(30.4-60.9m)
51-100
(15.2-30.4m)
26-50
(7.6-15.2m)
Volts
6
10
10 12
12
Not Recommended
Ampere Rating
Minimum Gauge Cord Sets
Total Length of Cord in Feet
Save These Instructions
Not More Than
More Than
American Wire Gauge
12 16
16
1618
1618
16
14
14
14
16
6
Motor
Be sure your power supply agrees with the nameplate marking.
115 Volts means your tool will only operate on standard 60HZ
household power. 230 Volts means your tool will only operate
on standard 50 HZ household power. Do not operate AC tools
on DC. Lower voltage will cause loss of power and can result in
overheating. Using a machine on an unmatched power source
voids your warranty.
Extension Cords
Make sure your extension cord is in good condition. When using
an extension cord, be sure to use on heavy enough to carry the
current voltage resulting in loss of power and overheating. The
Drill Doctor® has a 1.75 ampere rating. The following table shows
the correct size to use depending on cord length and nameplate
ampere rating. If in doubt use the next heavier gauge. The smaller
the gauge number the heavier the cord.
Loading ...
Loading ...
Loading ...