Loading ...
Loading ...
Loading ...
Basic Features
Picture Options
{_ MENU FITI_ Picture _ Picture Options
ENTER 1_
In PC mode, you can only make changes to the Color
Tone, Size and Auto Protection Time.
Ill Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic.
Settings can be adjusted and stored for each external
device connected to an input on the TV.
Ill Size: Your cable box/satellite receiver may
have its own set of screen sizes as well.
However, we highly recommend you use
16:9 mode most of the time.
16:9 : Sets the picture to 16:9 wide mode.
Zoom1 : Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
Available with HD 1080i / 720p signals in 16:9
mode.
4:3 : Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
NOTE
" When Double (_, _) mode has been set in PIP
(Picture-in-Picture), the Picture Size cannot be set.
* After selecting Zoom1, Zoom2 orWide Fit:
1. Press the I_ button to select Position.
2. Press the ENTERIZ_ button.
3. Press the A or _' button to move the picture up
or down.
4. Press the ENTERIZ_ button.
5. Press the I_ button to select Reset.
6. Press the ENTERIZ_ button to reset the picture
to its default position.
* After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the _ or I_ button to select Position.
2. Press the ENTERI_ button.
3. Press the A, _, _ or I_ button to move the
picture.
4. Press the ENTERIZ_ button.
5. Press the _ or I_ button to select Reset.
6. Press the ENTERI_ button.
* HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
* Settings can be adjusted and stored for each
external device you have connected to an input on
the TM
ATV,AV, 16:9, Zoom1,
Component (480i, 480p) Zoom2, 4:3
DTV(1080i), 16:9, 4:3, Wide Fit,
Component (1080i, 1080p), Screen Fit
HDMI (720p, 1080i, 1080p)
PC 16:9, 4:3
Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualization): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength,
Only available for analog channels,
When bar is green, you are receiving the best
possible signal.
8 English
Loading ...
Loading ...
Loading ...