Loading ...
Loading ...
Loading ...
16
Cleaning
WARNING
- Never use steam cleaners.
- Before cleaning, ensure that the cooking zones are switched o and that the residual heat
indicator (“H”) is not displayed.
IMPORTANT: do not use abrasive sponges or pan scourers as they could ruin the glass surface.
• After each use, clean the hob once it has cooled in order to remove any food residues.
• Sugar and foods with a high sugar content damage the glass ceramic surface and must be
immediately removed.
• Salt, sugar and sand can scratch the glass surface.
• Use a soft cloth, absorbent kitchen wipes or a specialist hob cleaner (see the manufacturer’s
instructions).
Troubleshooting guide
• Read and follow the instructions given in the section “Instructions for use”.
• Connect the hob to the electricity supply and check that the supply has not been shut o.
• Clean the hob and dry it thoroughly.
• If you are unable to turn the hob o after using it, disconnect it from the power supply.
• If alphanumeric codes appear on the display when the hob is switched on, consult the following table
for instructions.
ERROR CODE DESCRIPTION POSSIBLE CAUSES REMEDY
The hob switches o,
and after 30seconds
emits an acoustic
signal every
10seconds.
Continuous pressure
on control panel area.
Water or utensils on
control panel.
Clean the control
panel.
C81, C82, C83 The control panel
switches o because of
excessively high
temperatures.
The internal
temperature of
electronic parts is too
high.
Wait for the hob to cool
down before using it
again.
F42 or F43 The connection
voltage is wrong.
The sensor detects a
discrepancy between
the appliance voltage
and that of the mains
supply.
Disconnect the hob
from the mains and
check the electrical
connection.
F12, F21, F25, F36, F37,
F40, F47, F56, F58, F60,
F61, F62, F63, F64
Call the After-Sales Service and specify the error code.
Loading ...
Loading ...
Loading ...