Loading ...
Loading ...
Loading ...
10
Using existing pots and pans
Use a magnet to check whether pots or pans are suitable for use on the induction hob: pots are unsuitable
if they cannot be magnetically detected.
- Ensure pots have a smooth bottom, otherwise they may scratch the hob’s glass ceramic surface. Check
dishes.
- Never place hot pots or pans on the hob’s control panel. This could result in damage.
OK NO
Recommended pan base diameters
XL
Ø 30 cm Ø 14 cm 30 cm
XL
Ø 28 cm Ø 18 cm 28 cm
L
Ø 24 cm Ø 17 cm 24 cm
L
Ø 21 cm Ø 15 cm 21 cm
M
Ø 18 cm Ø 14 cm 18 cm
S
Ø 14.5 cm Ø 11 cm 14.5 cm
IMPORTANT: Refer to the “SENSOR” section for information on the correct pan base diameters for cooking
zones with the SENSOR function. If adapter plates (not provided) are used or a pan is empty, the internal
temperature of the system will exceed the set limit and the power supply to the hob will be switched o.
This happens to protect the internal components from overloading. We recommend switching o the hob
and allowing the cooking zone to cool down to the temperature at which the indicators on the control
panel switch o.
Installation
After unpacking the hob, check that there has been no damage during
transport. If in doubt, contact the dealer or After-Sales Service.
PREPARING THE HOUSING UNIT
WARNING
- Install a separator panel under the hob.
- The lower part of the product must not be accessible after
installation.
- If there is an oven beneath the hob, do not install the separator panel.
• For the distance between the underside of the appliance and the separator panel below, observe the
dimensions given in the gure.
• To ensure correct operation of the product, do not obstruct the minimum required clearance between
the hob and the top of the unit.
• Cut the worktop to t before installing the hob and carefully remove any shavings or sawdust.
• If there is an oven beneath the hob, check that it has a cooling system.
• For ush-mounting, call the After-Sales Service to t screw kit 4801 211 00112 supplied with the
product.
• Do not install the hob over a dishwasher or washing machine as the electronic circuits could be
damaged by steam and humidity.
min 5 mm
min 20 mm
min 5 mm
Loading ...
Loading ...
Loading ...