Loading ...
Loading ...
Loading ...
28
W415-1434 / 06.09.15
EN
IMPORTANT: The HDX35 requires a minimum inside enclosure height of 70" (1778mm), measured from the
bottom of the appliance. For temperature requirements, this area must be left unobstructed. It is recommended
that the enclosure be ventilated at the top and bottom to circulate the air.
70"
1778mm
MINIMUM
ENCLOSURE
HEIGHT
32 3/4"
832mm
MINIMUM
52 7/16"
1332mm
MINIMUM
PLUS RISE *
1"
25mm
2"
51mm
COMBUSTIBLE
MATERIAL
TOP OF ENCLOSURE
BRICK
STEEL STUD
FRAMING
TOP OF
FIREPLACE
OPENING
0” (0mm) IF NON-
COMBUSTIBLE FINISHING
IS USED SUCH AS BRICK
AND STONE
NON-COMBUSTIBLE
MATERIAL
NOTE: JOINT COMPOUNDS AND TAPES
THAT ARE RESILIENT TO HEAT AND
CRACKING SHOULD BE USED WHEN
TAPING AND MUDDING SEAMS.
SAFETY BARRIER
37 1/4"
946mm
MINIMUM
INSULATED
SLEEVE
!
WARNING
RISK OF FIRE!
THE FRONT OF THE APPLIANCE MUST BE FINISHED WITH ANY NON-COMBUSTIBLE MATERIALS
SUCH AS BRICK, MARBLE, GRANITE, ETC., PROVIDED THAT THESE MATERIALS DO NOT COVER
THE APPLIANCE OPENING.
THE STEEL STUD FRAMING KITS WITH CEMENT BOARD PROVIDED MUST BE INSTALLED UNLESS
RECESSING INTO NON-COMBUSTIBLE MATERIALS DEEPER THEN 1 1/2".
5.2 MINIMUM CLEARANCE TO COMBUSTIBLE ENCLOSURES
Loading ...
Loading ...
Loading ...