User Manual
Read this manual thoroughly before using and save it for future reference
Coffee Maker
12
10
8
6
4
When using electrical appliance. Basic safety precautions should always be followed includ-
ing the following:
Read all instructions.
Make sure that your outlet voltage corresponds to the voltage stated on the rating label of
the coffee maker.
To protect against fire, electric shock and injury to persons do not immerse cord, plug, or in
water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or
taking off parts, and before cleaning the appliance.
Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or has been damaged in any manner. Return appliance to an authorized
service facility for examination, repair or adjustment.
The use of accessory not recommended by the appliance manufacturer may result in fire,
electric shock or injury to persons.
Do not use outdoors.
Do not let cord hang over edge of table or counter, or touch hot surface.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Do not use appliance for other than intended use.
Do not clean carafe with cleansers, steel wool pads, or other abrasive material.
To disconnect, turn any control to “Off”, remove plug from wall outlet. Always hold the plug.
But never pull the cord.
Scalding may occur if the cover is removed during the brewing cycles. Be careful not to get
burned by the steam.
Some parts of appliance are hot when operated, so do not touch with hand. Use handles or
knobs only.
Do not set a hot carafe on a hot or cold surface.
Do not let the coffee maker operate without water.
Do not use a cracked carafe or a carafe having a loose or weakened handle.
Please do not open the top cover and make sure the glass carafe is placed on the thermal
insulation plate correctly during the brewing.
To reduce the risk of fire or electrical shock, do not remove the cover. No user serviceable
parts inside. Repair should be done by authorized service personnel only.
The carafe is designed for use with this appliance. It must never be used on a range top.
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Children should be supervised to ensure that they do not play with the appliance.
This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
Save these instructions.
IMPORTANT SAFEGUARDS
- 1 -
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1 1.
12.
13.
14.
15.
16.
17.
18.
19.
20.
2 1.
22.
23.
24.
25.
KNOW YOUR COFFEE MAKER
CONTROL PANEL
- 2 -
Filter Top cover
Control panel
Water level gauge
Thermal insulation plate
Bottom cover
Funnel
Carafe lid
Glass carafe
LCD display
ON/OFF indicator
STRENGTH indicator
Knob
- 3 -
Check that all accessories are complete and the unit is not damaged. Fill water into water
tank to the MAX level and brew water for several times without coffee powder, then discard the
water. Clean and dry all detachable parts thoroughly according to the section.
BEFORE THE FIRST TIME USE
How to Brew Normal Coffee?
Add water. Note: Do not exceed the MAX
water level.
Reusable filter included, can also support
paper filter.
USING YOUR COFFEE MAKER
Pour coffee ground into the filter. Insert the glass carafe with lid closed onto
the thermal insulation plate horizontally.
Plug in, the LCD display indicates “AM
12:00” and it blinks.
Rotate the knob to the “ON/OFF” setting,
then press the knob once, the ON/OFF
indicator illuminates in red, and the coffee
maker starts to brew normal coffee.
ON/OFF Light
1 2
3 4
5 6
- 4 -
Turn the knob to the “HOUR” setting and then press the knob once, one hour can be
increased. And the “HOUR” can be increased fast if hold and press the knob for more than
1.5 seconds.
Turn the knob to the “MIN” setting and then press the knob once, one minute can be
increased. And the “MIN” can be increased fast if hold and press the knob for more than 1.5
seconds.
Then you can rotate the knob to set other functions.
1.
2.
3.
How to Set the Current Time?
Turn the knob to the “STRENGTH” setting, the “STRENGTH” indicator illuminates in orange, then
turn the knob to the “ON/OFF” setting and press the knob once, the ON/OFF indicator will
illuminate in red and the coffee maker will brew thick coffee.
To cancel the “STRENGTH” setting, turn the knob to the “STRENGTH” setting and press the knob
once.
1.
2.
How to Brew Thick Coffee?
If you do not want the coffee maker to start operation immediately, for example now it is
AM8:00, you hope that the coffee maker will automatically start working at PM1:00, then you can
follow the below steps. Note: The time cycle is 12 hours, please set the current time first.
How to Program the Timer?
Turn the knob to the “PROGRE” setting, Press the knob once, the ON/OFF
indicator blinks in green, and the screen
indicates AM“12:00” .
Turn the knob to “HOUR”, press the knob
to set the time, long press the knob to
quickly increase the time
Turn the knob to “MIN”, press the knob to
set the time, long press the knob to
quickly increase the time
Green Light
Flashing
1 2
3 4
- 5 -
To cancel the “Programmable” setting, turn the knob to the “PROG” setting and press the
knob once.
The coffee machine has 30s anti-drip feature, so during brewing time, you can feel free to
take out the carafe, pour and serve a cup of coffee within 30s.
Usually a cup of coffee needs a level spoon of coffee powder, but you may adjust according
to personal taste.
The coffee can be kept warm on the thermal insulation plate, and it will shut off automatically
after 120 minutes from the ON/OFF setting being activated if it has not been manually
disconnected at the completion of brewing. For an optimum coffee taste, serve it just after
brewing.
The brewing process can be interrupted by pressing the knob again at any time, and the
ON/OFF indicator will extinguish, indicating your coffee maker is shut off.
The coffee you get will less than the water you have added, as some water is absorbed by
coffee ground and adhere to the plastic.
Always turn the coffee maker off and disconnect the power supply when not use.
Pay attention to pour the coffee out, otherwise you may be hurt as the temperature of coffee
just finished is high.
Cord Storage feature on the back eliminates Tangles on the Countertop
Clean all detachable parts after each use in hot sudsy water.
Wipe the exterior surface of unit with a soft, damp cloth to remove stains.
Water droplets may buildup in the above area of the funnel and drip onto the product base
during brewing. To control the dripping, wipe off the area with a clean, dry cloth after each use.
Use a damp cloth to gently wipe the thermal insulation plate. Never use abrasive cleaner to
clean it.
Replace all parts and keep for next use.
1.
2.
3.
4.
5.
Note:
CAUTION: Be sure to unplug this appliance before cleaning. To protect against
electrical shock, do not immerse cord, plug or unit in water or liquid. After each
use, always make sure plug is first removed from wall outlet.
CLEANING AND MAINTENANCE
After set the future brew
time, turn the knob to
“PROGRE”, press the knob
once
Then the LCD screen shows
the current time, and the
ON/OFF light illuminates in
green solidly.
When the scheduled time
is due, the ON/OFF
indicator turns to red, the
machine starts to brew
The Light
Turns To Red
Solid Green
Light
5 6 7
1.
2.
3.
4.
5.
6.
A clean coffee maker is essential for making great tasting coffee. Regularly clean the coffee
maker as specified in the “CLEANING AND MAINTENANCE” section. Always use fresh, cold
water in the coffee maker.
Store unused coffee powder in a cool, dry place. After opening a package of coffee powder,
reseal it tightly and store it in a refrigerator to maintain its freshness.
For an optimum coffee taste, buy whole coffee beans and finely grind them just before
brewing.
Do not reuse coffee powder since this will greatly reduce the coffee’ flavor. Reheating coffee
is not recommended as coffee is at its peak flavor immediately after brewing.
Clean the coffee maker when over-extraction causes oiliness. Small oil droplets on the
surface of brewed, black coffee are due to the extraction of oil from the coffee powder.
Oiliness may occur more frequently if heavily roasted coffees are used.
You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electrical equipments
to an appropriate waste disposal center.
IMPORTANT SAFEGUARDS
ENVIRONMENT FRIENDLY DISPOSAL
To keep your coffee maker operating efficiently, periodically you should clean away the
mineral deposits left by the water according to the water quality in your area and the use
frequency, we recommend removing mineral deposits as follows:
Fill the water tank with water and descaler to the max level as indicated on the water level
gauge (the scale of water and descaler is 4:1, the detail refers to the instruction of descaler.
Please use “household descaler”, you may also use the citric acid instead of the descaler
(the one hundred parts of water and three parts of citric acid).
Insert the glass carafe onto the warming plate.
Make ensure filter (without coffee powder) and funnel are assembled in place.
Turn on the appliance and allow it to “brew” de-scaling solution by follow the operation above.
After “brew” one-cup solution, switch off the appliance.
Leave the solution stay for 15 minutes and repeat step 3-5.
Turn on the appliance and run off the solution until the water tank is completely empty.
Rinse by operating the appliance with water at least 3 times.
1.
2.
3.
4.
5.
6.
7.
8.
REMOVING MINERAL DEPOSITS
