Loading ...
Loading ...
Loading ...
Connect Hose and Water Supply to Pump
NOTICE:DONOTrun the pump without the water supply
connected and turned on.
= Damageto equipmentresultingfromfailureto followthis
instructionwill voidwarranty.
NOTE:Remove and discard the shipping caps from the
pump's high pressure outlet and water inlet before attaching
hoses.
1. Uncoil high pressure hose and attach one end of hose to
base of spray gun. Tighten by hand.
4. Run water through garden hose for 30 seconds to flush
it of debris. Turn off water.
IMPORTANT:DONOTsiphon standing water for the water
supply. Use ONLYcold water (less than 100%).
NOTICE'.Using a OneWay Valve (vacuum breaker or check
valve) at pump inlet can cause pump or inlet connector
damage.
= ThereMUSTbeat leasttenfeetof unrestrictedgardenhose
betweenthe pressurewasherinletandanydevice,suchas a
vacuumbreakeror checkvalve.
• Damageto equipment resulting from failure to follow this
instruction will void warranty.
A, WARNING: The high pressure stream of water that this
equipment produces can cut through skin and
its underlying tissues, leading to serious injury
and possible amputation.
= NEVERconnect high pressure hose to nozzleextension.
= Keep high pressure hose connected to pump and spray gun
while system is pressurized.
= Always be certain spray gun, nozzlesand accessoriesare
correctly attached.
2. Attach other end of high pressure hose to high pressure
outlet on pump. Tighten by hand.
3. Before connecting garden hose to water inlet, inspect
inlet screen (A). Cleanscreen if it contains debris or have
it replacedif damaged.DO NOTran pressure washer if
inlet screen is damaged or missing.
5. Connectgarden hose (not to exceed50 feet in length) to
water inlet. Tighten by hand.
_, WARNING:Risk of eye injury.
Spray can splash back or propel objects.
• Always wear safety goggles when using this equipment or in
vicinity of where equipment is in use.
• Before starting the pressure washer, be sure you are wearing
adequatesafety goggles.
• NEVERsubstitute safety glasses for safety goggles.
6. Turn ONwater, point gun in a safe direction and squeeze
trigger to purge pump system of air and impurities.
ChecklistBeforeStarting Engine
Reviewthe unit to ensure you have performed all of the
following:
1. Besure to read Safety Rules and Operationsections
before using the pressure washer.
2. Makesure handle is in place and secure.
3. Checkthat oil has been added to proper level in engine
crankcase.
4. Add proper fuel to fuel tank.
5. Checkfor proper hose connections (high pressure and
water supply) and that there are no kinks, cuts, or
damageto the high pressure hose.
6. Provide proper water supply (not to exceed100%).
Loading ...
Loading ...
Loading ...