Loading ...
Loading ...
Loading ...
Air Coolin9 System
Over time debris may accumulate in cylinder cooling fins and
cannot be observed without partial engine disassembly. For
this reason, we recommend you have a qualified Sears
service dealer clean the cooling system per recommended
intervals (see Maintenance Schedule). Equally important is to
keep top of engine free from debris. See CleanDebris.
Keepareas within heavy line clear of debris.
AFTEREACHUSE
Water should not remain in the unit for long periods of time.
Sediments or minerals can deposit on pump parts and
"freeze" pump action. Follow these procedures after every
use:
1. Shut off engine, turn off water supply, point gun in a
safe direction and squeezetrigger to relieve trapped
pressure, engagetrigger lock on spraygun and let engine
cool.
WARNING:The high pressure stream of water that this
equipment produces can cut through skin and
its underlying tissues, leading to serious injury
and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which can cause
injury.
• Keephighpressurehoseconnectedto pumpand spraygun
whilesystemis pressurized.
• ALWAYSpointspraygun in safedirectionand squeezespray
guntrigger,to releasehighpressure,everytimeyoustop
engine.Engagetriggerlockwhennot in use.
2. Disconnect hose from spray gun and high pressure
outlet on pump. Drain water from hose, gun, and nozzle
extension. Use a rag to wipe off the hose.
3. Empty pump of all pumped liquids by pulling recoil
handle about 6 times. This should remove most liquid in
pump.
4. Store unit in a clean,dry area.
5. If storing for more than 30 days see Long TermStorage
on next page.
A WARNING:Fueland its vapors are extremely
flammable and explosive.
Fire or explosion can cause severe burns
or death.
WHENSTORINGFUELOREQUIPMENTWITHFUELINTANK
* Storeawayfrom furnaces,stoves,waterheaters,clothes
dryers,or otherappliancesthathavepilot lightor other
ignitionsourcebecausethey can ignitefuel vapors.
18
Loading ...
Loading ...
Loading ...