Loading ...
Loading ...
Loading ...
Your pressure washer requires some assembly and is ready
for use only after it has been properly serviced with the
recommended oil and fuel.
If you have any problemswith the assembly of your
pressurewasher, please call the pressurewasher helpline
at 1=800-222-3135.
Attach Handle
1. Place handle (A) onto base (B). Make sure holes in
handlealign with holes on base.
UNPACKTHEPRESSUREWASHER
1. Remove everything from carton except pressurewasher.
2. Opencarton completely by cutting each corner from top
to bottom.
3. Remove pressure washer from carton.
CARTONCONTENTS
Check all contents, if any parts are missing or damaged, call
the pressure washer helplineat 1-800-222-3136.
* Main Unit
* Handle
* Wheel Kit
* High PressureHose
* Spray Gun
* Adjustable Nozzle Extension
* Oil Bottle
* Safety Goggles
* Mesh Accessory Bag
* Parts Bag(which includes the following):
, Operator's Manual
Becomefamiliar with each piece before assembling the
pressure washer. Identify all contents with the illustration on
page 5. If any parts are missing or damaged, call the
pressure washer helpline at 1-800-222-3136.
ASSEiViBUHGPRESSUREWASHER
Your Craftsman pressure washer will needassembly before
operation:
1. Attach handleto main unit.
2. install wheel kit.
3. Add oil to engine crankcase.
4. Add fuel to fuel tank.
5. Connect pressure hose to spray gun and pump.
6. Connect water supply to pump.
7. Attach nozzleextension to spray gun.
2. insert carriage bolts (C) through holes from outside of
unit and attach a plastic knob (D) from inside of unit.
Tighten by hand.
Install Wheel Kit
The wheel kit is designed to greatly improve the portability of
your pressure washer.
NOTE:Wheel kit is not intended for over-the-road use.
Install the wheeJkit as follows:
1. Placethe bottom of the pressure washer frame on aflat,
even surface.
2. Slide a wheel (E) over the axle pin (F).
NOTE:Besure to install wheel with raised hub inboard.
3. Slide axle pin through hole (G) in frame.
4. Retainwheel on axle pin with retaining pin (H).
5. Repeatstep 2 through 4 to secure secondwheel.
Loading ...
Loading ...
Loading ...