Loading ...
Loading ...
Loading ...
6. Prep #50 Drill Bit & Power Drill
Secure the #50 size Drill-Bit and install it into the
Power Drill. While grasping the Elbow of the
Flare Adapter – Align to the tip of drill bit so
your drill-bit is perfectly aligned to orifice hole.
7. Drill the Adapter Orifice
Aligning Drill to Flare Adapter, Push the Spinning
Drill into the center of Orifice Hole approx. 1/8
th
Inch then pulling out, lastly blow some air into
tip clearing any small particles.
8. Screw on the NG Regulator
Fasten on the NG Regulator, with the Female
Flare Adapter connecting to the Right Back Side
Gas Manifold Male Flare Adapter. Notice Arrow
indicating direction of Gas Flow.
9. Finalize LP to NG Conversion
The NG Regulator will have a ½” Female Flare
Adapter on other end, try our 18” Black Hose, or
a Quick Disconnect – Always have a Licensed
Plumber make this final connection.
GAS CONVERSION
–
NG
REGULATOR
PAGE 23
Loading ...
Loading ...
Loading ...