Loading ...
Loading ...
Loading ...
Island Safety Vent Installation for either Liquid Propane or Natural Gas
Grill LP to NG Gas Conversion
This Gas Conversion requires the following parts (Included in Kit)
(1) #50 Drill Bit (1) NG Regulator
with 3/8” Flare Adapter
The following tools are recommended (Not Included in Kit)
Wrench Power Drill
For Natural Gas
Natural Gas (NG) is lighter and will raise to upper
end of structure upon leak. Outdoor Kitchen Islands
housing Natural Gas Appliance must have several
vents located at the approximate level as the
Appliance Control Panel, were Knobs are located.
For Propane Gas
Liquid Propane Gas (LP) is Heavier and will lower to
base of structure upon leak. Outdoor Kitchen Islands
housing Propane Gas Appliance must have several
vents located within 4" to 6" from ground level.
IMPORTANT!
The Best time to perform this conversion is before grill has been installed into island enclosure. As you
will need access Multiple parts of the Back Underside of Grill where Gas Line hooks up and two positions
of Flare Adapters. Accessing this location afterwards requires either removing the grill from island or
crawling underneath grill through an access door to reach back underside of grill.
GAS CONVERSION
–
REQUIRED TOOLS
PAGE 20
Loading ...
Loading ...
Loading ...