Loading ...
Loading ...
Loading ...
Open Hood
Ensure Burner Control
Knobs are in the OFF
position
1. Push the knob in and SLOWLY turn
the Left KNOB counter-clockwise to
HIGH. Allow Gas to Completely Fill
the IR Burner
chamber.
2. You will hear a loud click as the
electronic lighter produces a spark.
Listen for the sound of the gas igniting
and look for a flame spreading across
the ceramic plates from left to right. If
the burner does not light on the first
try, repeat immediately.
3. Repeat this until IR Burner lights all
the way across and stay on. There is a
Brass Wire called the Thermocouple, it
must be heated all the way down to
the valve for the gas to stay on.
TIP: If IR-Burner does not stay lit, try
running the bottom burners first for 10-15
minutes, this will heat the Thermocouple
and help the IR
-
Burner stay lit.
5. To shut off the burners, rotate the
knob and turn to OFF.
6. It is normal to hear a popping sound
when the burners are turned off.
GRILL START
-
UP
–
IR BURNER LIGHTING
4. If the burner does not light in 5
seconds then wait five minutes until the
gas clears before attempting to light it
again. Repeat the procedure if not
lighting. The back IR-Burner requires
additional time for first time lighting.
PAGE 19
Loading ...
Loading ...
Loading ...