Loading ...
Loading ...
Loading ...
OPERATION
OvenControl,Clock and Timer
Your new control has a series of
tones that will sound at different times.
These tones may sound while you set
the control for an oven function, or at
the end of the oven function. It will
also alert you there may be a problem
with the functions, Below are the
types of tones and a brief description
of each,
TONES WHILE SETTING THE
CONTROL- When you press a touch
pad you wilt hear a beep This beep
will let you know you have placed
enough pressure on the pad to
activate it. (The arrow pads do not
beep,)
END OF TIMED CYCLE TONE -
At the end of an automatic timed
cooking function, you will hear 3 short
beeps followed by 1 beep every
6 seconds. This 6 second beep will
continue to sound until the CLEAR/
OFF pad is pressed or you may
select the special feature to cancel
this 6 second beep from sounding at
the end of future cycles
TO CANCEL THE 6 SECOND BEEP
li, Press and hold the BAKE and
BROIL pads at the same time for
3 seconds, until the display shows
"SE"
2. Press the KITCHEN TIMER
pad The display will show
"CON BEEP" (continuous beep).
3, Press the KITCHEN TIMER
pad again. The display will show
"BEEP" (beep canceled),
4. Press the START pad to cancel
the 6 second beep and leave the
special feature mode.
If you would like to return the 6
second beep, repeat steps above
until the display shows your choice
and press the START pad
ATTENTION TONE - This tone will
sound if you make an error or an
oversight is made while setting an
oven function
Examples would be:
a. Setting a clean cycle and the oven
door is not properly closed,
b. Setting function and not pressing
the START pad
e. Pressing an additional function
pad without first setting a
temperature or time
d. "ERR" will flash if you set an
invalid temperature Press the
CLEAR/OFF pad to clear the
control and reset your oven
function,
Any of these can be quickly identified
by watching the display,
PREHEAT TONE - When you
set an oven temperature, the oven
automatically starts to heat, When the
temperature inside the oven reaches
the temperature you have set, a tone
will sound to let you know the oven is
ready for baking.
If you set an oven function and the
control beeps while the display is
flashing "F" and a number or letter
such as "F4" or "FI," there may be a
problem with the control or oven,
Simply press the CLEAR!OFF pad
and wait about an hour, Try setting
the function again If the code
repeats, write down the flashing
code and call for service. Tell the
technician what code was flashing.
11
Loading ...
Loading ...
Loading ...