Loading ...
Loading ...
Loading ...
Installation notes
53
Flush-mounted installation
Flush-mounted installation is only
possible in natural stone (granite,
marble), solid wood and tiled
worktops. Certain models are suitable
for building into glass worktops -
please see the relevant label on the
cooktop. When using a worktop made
from any other material, please check
first with the worktop manufacturer
that it is suitable for installing a flush-
mounted cooktop.
The internal width of the base unit
underneath the appliance must be at
least as wide as the inner worktop cut-
out (see “Building-in dimensions -
Flush-mounted cooktops”), so that the
cooktop is easily accessible from
underneath after installation and the
bottom half of the casing can be
removed for maintenance. If the
underside of the cooktop is not freely
accessible after installation, any
sealant used to plug the gaps around
the appliance must be removed to
enable the cooktop to be lifted out of
the cut-out should this be necessary.
Natural stone worktops
The cooktop is placed directly in the
cut-out.
Solid wood worktops, tiled worktops,
glass worktops
The cooktop is placed on a wooden
frame inside the cut-out. The frame
must be provided on site and is not
supplied with the appliance.
Loading ...
Loading ...
Loading ...