Loading ...
Loading ...
Loading ...
DJI Mavic 3
User Manual
63
©
2021 DJI All Rights Reserved.
Auto Takeoff/Landing
Auto Takeoff
Use auto takeoff:
1.
Launch DJI Fly and enter the camera view.
2.
Complete all steps in the pre-flight checklist.
3.
Tap
. If conditions are safe for takeoff, press and hold the button to confirm.
4.
The aircraft will take off and hover 1.2 m above the ground.
Auto Landing
Use auto landing:
1.
Tap
. If conditions are safe to land, press and hold the button to confirm.
2.
Auto landing can be cancelled by tapping
.
3.
If the Vision System is working normally, Landing Protection will be enabled.
4. Motors stops after landing.
Starting/Stopping the Motors
Starting the Motors
A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the bottom
inner or outer corners to start the motors. Once the motors have started spinning, release both sticks
simultaneously.
OR
Stopping the Motors
There are two methods to stop the motors.
Method 1: When the aircraft has landed, push and hold the left stick down. The motors will stop after
three seconds.
Method 2: When the aircraft has landed, push the left stick down and perform the same CSC that was
used to start the motors. The motors will stop immediately. Release both sticks once the
motors have stopped.
OR
Method 1 Method 2
Loading ...
Loading ...
Loading ...