Loading ...
Loading ...
Loading ...
DJI Mavic 3
User Manual
39
©
2021 DJI All Rights Reserved.
The gimbal lock function works normally when the operating temperature is -10° to 40° C (14° to
104° F). It may malfunction outside this temperature range and a prompt will appear in DJI Fly if this
occurs. If the gimbal lock malfunctions when attempting to unlock the gimbal, users can adjust the
gimbal axes manually to unlock the gimbal. It is not recommended to manually adjust the gimbal
axes unless necessary.
If the gimbal lock malfunctions, it will resume normal operation once the operating temperature is
-10° to 40° C (14° to 104° F).
It is normal for the gimbal to unlock if it is impacted in any way. Restart the aircraft to lock the gimbal again.
It is normal for the gimbal to vibrate slightly after it is locked.
Camera Profile
DJI Mavic 3 uses a 4/3-in CMOS sensor Hasselblad L2D-20c camera, which can take 20MP photos
and record at 5.1K 50fps/DCI 4K 120fps Apple ProRes 422 HQ and H.264/H.265 format videos. The
camera also supports 10-bit D-Log video, has an adjustable aperture of f/2.8 to f/11, and can shoot
from 1 m to infinity.
The tele camera boasts a 1/2-in CMOS sensor, capable of shooting 12MP photos with an aperture of
f/4.4 and shooting from 3 m to infinity. When in Explore mode, the tele camera can zoom at 28x.
Make sure the temperature and humidity is suitable for the camera during usage and storage.
Use a lens cleanser to clean the lens to avoid damage.
DO NOT block any ventilation holes on the camera as the heat generated may damage the device
and hurt the user.
Storing Photos and Videos
DJI Mavic 3 has 8 GB of built-in storage and supports the use of a microSD card to store photos and
videos. A SDXC or UHS-I microSD card is required due to the fast read and write speeds necessary for
high-resolution video data. Refer to the Specifications section for more information about recommended
microSD cards.
In addition, DJI Mavic 3 Cine aircraft comes with a built-in 1TB SSD. The footage can be output quickly
via the DJI 10Gbps Lightspeed Data Cable.
Do not remove the microSD card from the aircraft while it is powered on. Otherwise, the microSD
card may be damaged.
To ensure the stability of the camera system, single video recordings are limited to 30 minutes.
Check camera settings before use to ensure they are configured as desired.
Before shooting important photos or videos, shoot a few images to test the camera is operating
correctly.
Photos or videos cannot be transmitted or copied from the camera if the aircraft is powered off.
Make sure to power off the aircraft correctly. Otherwise, your camera parameters will not be saved
and any recorded videos may be damaged. DJI is not responsible for any failure of an image or video
to be recorded or having been recorded in a way that is not machine-readable.
Loading ...
Loading ...
Loading ...