Loading ...
Loading ...
Loading ...
DJI Mavic 3
User Manual
30
©
2021 DJI All Rights Reserved.
Flight Recorder
The Advanced Pilot Assistance Systems 5.0 (APAS 5.0) feature is available in Normal and Cine mode.
When APAS is enabled, the aircraft continues to respond to user commands and plans its path according
to control stick inputs and the flight environment. APAS makes it easier to avoid obstacles, obtain
smoother footage, and gives a better flying experience.
Keep moving the control sticks in any directions. The aircraft will avoid the obstacles by flying above,
below, or to the left or right of the obstacle. The aircraft can also response to the control stick inputs while
avoiding obstacles.
When APAS is enabled, the aircraft can be stopped by pressing the Flight Pause button on the remote
controller or tapping the screen in DJI Fly. The aircraft hovers for three seconds and awaits further pilot
commands.
To enable APAS, open DJI Fly, enter System Settings, then Safety, and enable APAS by selecting Bypass.
Select Normal or Nifty mode when using Bypass. Nifty mode, the aircraft can fly faster, smoother, and
closer to obstacles obtaining better footage while avoiding obstacles. Meanwhile, the risk of crashing with
the obstacles increases. Fly with caution.
Nifty cannot work normally in the following situations:
1.
When aircraft orientation changes rapidly flying near obstacles when using Bypass.
2.
When flying through narrow obstacles such as canopies or bushes at high speed.
3.
When flying near obstacles that are too small to detect.
4.
When flying with the propeller guard.
Landing Protection
Landing Protection will activate if Obstacle Avoidance is set to Bypass or Brake and the user pulls the
throttle stick down to land the aircraft. Landing Protection is enabled once the aircraft begins to land.
1.
During Landing Protection, the aircraft will automatically detect and carefully land on suitable ground.
2.
If the ground is determined unsuitable for landing, the aircraft will hover when the aircraft descends
below 0.8 m. Pull down on the throttle stick for more than five seconds and the aircraft will land
without obstacle avoidance.
Make sure you use APAS when the vision systems are available. Make sure there are no people,
animals, objects with small surface areas (such as tree branches), or objects with transparent
surfaces (such as glass or water) along the flight path.
Make sure you use APAS when the Downward Vision System is available or the GNSS signal is
strong. APAS may not function properly when the aircraft is flying over water or snow-covered areas.
Be extra cautious when flying in extremely dark (<300 lux) or bright (>10,000 lux) environments.
Pay attention to DJI Fly and make sure APAS is working normally.
APAS may not function properly when the aircraft is flying near flight limits or in a GEO zone.
Flight data including flight telemetry, aircraft status information, and other parameters are automatically
saved to the internal data recorder of the aircraft. The data can be accessed using DJI Assistant 2
(Consumer Drones Series).
Advanced Pilot Assistance Systems (APAS 5.0)
Loading ...
Loading ...
Loading ...