Dji 6941565919694 Mavic 3 Fly More Combo - Camera Drone with 4/3 CMOS Hasselblad Camera, 5.1K Video, Omnidirectional Obstacle Sensing, 46-Min Flight, Advanced Auto Return, Max 15km Video Transmission

User Manual - Page 37

For 6941565919694.

PDF File Manual, 73 pages, Read Online | Download pdf file

6941565919694 photo
Loading ...
Loading ...
Loading ...
DJI Mavic 3
User Manual
36
©
2021 DJI All Rights Reserved.
It is recommended to discharge the Intelligent Flight Batteries to 30% or lower before transportation.
Using DJI 65W Portable Charger
1.
Connect the DJI 65W Portable Charger to an AC power supply (100-240 V, 50/60 Hz).
2.
Attach the aircraft to the charger using the battery charging cable with the battery powered off.
3.
The battery level LEDs display the current battery level during charging.
4.
The Intelligent Flight Battery is fully charged when all the battery level LEDs are off. Detach the
charger when the battery is fully charged.
DO NOT charge an Intelligent Flight Battery immediately after flight as the temperature may be too
high. Wait until it cools down to room temperature before charging again.
The charger stops charging the battery if the battery cell temperature is not within the operating
range of to 4C (41° to 104° F). The ideal charging temperature is 2to 28° C (71.6° to 82.F).
Fully charge the battery at least once every three months to maintain battery health.
DJI does not take any responsibility for damage caused by third-party chargers.
This can be done by flying the aircraft outdoors until there is less than 30% charge left.
The table below shows the battery level during charging.
LED1
LED2
LED3
LED4
Battery Level
0% < Battery Level 50%
50% < Battery Level 75%
75% < Battery Level < 100%
Fully Charged
Battery Protection Mechanisms
The battery LED indicator can display battery protection prompts triggered by abnormal charging
conditions.
Battery Protection Mechanisms
LED1
LED2
LED3
LED4
Blinking Pattern
Status
LED2 blinks twice per second
Overcurrent detected
LED2 blinks three times per second
Short circuit detected
LED3 blinks twice per second
Overcharge detected
LED3 blinks three times per second
Over-voltage charger detected
LED4 blinks twice per second
Charging temperature is too low
LED4 blinks three times per second
Charging temperature is too high
Loading ...
Loading ...
Loading ...