Loading ...
Loading ...
Loading ...
DJI Mavic 3
User Manual
38
©
2021 DJI All Rights Reserved.
Gimbal and Camera
Gimbal Profile
The 3-axis gimbal of DJI Mavic 3 provides stabilization for the camera, allowing you to capture clear and
stable images and video. The control tilt range is -90° to +35°.
35°
0°
Use the gimbal dial on the remote controller to control the tilt of the camera. Alternatively, enter the
camera view in DJI Fly. Press the screen until an adjustment bar appears and drag up and down to
control the tilt of the camera.
Gimbal Operation Modes
Two gimbal operation modes are available. Switch between the different operation modes in DJI Fly.
Follow Mode: The angle between the gimbal’s orientation and aircraft front remains constant at all times.
FPV Mode: The gimbal synchronizes with the movement of the aircraft to provide a first-person flying
experience.
Do not tap or knock the gimbal when the aircraft is powered on. To protect the gimbal during takeoff,
take off from open and flat ground.
Precision elements in the gimbal may be damaged in a collision or impact, which may cause the
gimbal to function abnormally.
Avoid getting dust or sand on the gimbal, especially in the gimbal motors.
A gimbal motor may enter protection mode in the following situations:
a. The aircraft is on uneven ground or the gimbal is obstructed.
b. The gimbal experiences excessive external force, such as during a collision.
DO NOT apply external force to the gimbal after the gimbal is powered on. DO NOT add any extra
payload to the gimbal as this may cause the gimbal to function abnormally or even lead to permanent
motor damage.
Make sure to remove the storage cover before powering on the aircraft. Also, make sure to mount
the storage cover when the aircraft is not in use.
Flying in heavy fog or clouds may make the gimbal wet, leading to temporary failure. The gimbal
recovers full functionality once it is dry.
Gimbal Axes Lock
For more convenient storage, the gimbal axes will automatically lock after the aircraft is powered off and
unlock when it is powered on again. No user operation is required.
-90°
Loading ...
Loading ...
Loading ...