Loading ...
Loading ...
Loading ...
ge.com
Ovenwill notself-clean
What ToDo
• Allow tile oven to cool to i'oonl tenlpei'attli'e and
reset tile controls.
Possible Causes
The oven telnperature is
too high to set a self-clem_
operation.
Oven conlrols improperly set. • See tile Using the self-cleaning oven section.
"Crackling " or This is the sound of the • This is n(mnal.
"popping" sound metal heating and cooling
during both the cooking and
cleaning functions.
Excessive smoking Excessive soil. • Press tile CLEAR/OFFpad. Open tile windows to
during a clean cycle rid tile room of smoke. _4'ait until tile LOCKED door
light goes ott. Wipe up the excess soil and reset the
clean cycle.
Oven door will not Oven too hot. • Allow the oven to cool beh)w locking temperature,
open after a and LOCKEDor CLEANno longer appems in the displa):
clean cycle
Oven not clean after Oven controls not properly set. • See the Using the self-cleaning oven section.
a clean cycle
Oven was heavily soiled. • (3ean tq) hea\y spillovers heft)re starting the clean
cycle. Heavily soiled ovens lnav need to sell=clean
again or fin" a hmger period of time.
"LOCK DOOR" flashes The self-clean cycle has been • Close tile oven door.
in the display selected but the door is not
closed.
LOCKED DOORlight The oven door is locked • Press the CLEAR/OFFpad. Allow the oven to cool.
is on when you want because the temperature
tO COOk inside the oven has not
dropped below the
locking temperature.
"F-- and a number
or letter" flash
in the display
You have a flmction
error code,
• Disconnect all power to tile range fl)r at least
30 seconds and then reconnect power: If tile flmction
error code repeats, call for service.
33
Loading ...
Loading ...
Loading ...